Merging DUA II Specifications Page 58

  • Download
  • Add to my manuals
  • Print
  • Page
    / 168
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 57
54 Workstation Setup & Administration Guide
Chapter 4 Assembling the System
?
The USB-to-MIDI Converter
You can install a USB-to-MIDI converter if you are using a JL Cooper
controller in a Compaq W8000 system. The MIDISPORT 2x2 by MIDIMAN
has been tested with the Avid|DS system. You need a USB cable that connects
to a USB port on the Avid|DS system. Only connect the USB-to-MIDI
converter if you are going to use it.
To connect the USB-to-MIDI converter to a port on the system
1. Locate the MIDI converter USB cable.
2. Connect the device connector of the USB cable to the device connector at
the rear of the USB-to-MIDI converter.
3. Connect the USB connector of the USB cable to a USB port at the rear
of the PC.
4. Press the USB/MIDI Thru button In, at the front of the USB-to-MIDI
converter, to allow the device to act as a USB-to-MIDI converter.
To use the USB-to-MIDI converter, you must install the proper
revision driver prior to use. Go to www.midiman.net and install the
latest revision for the MIDISPORT 2x2.
USB-to-MIDI converter
Button (In position)
Rear
Front
Cable to USB
port on system
Page view 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 167 168

Comments to this Manuals

No comments