Merging DUA II Specifications download pdf (Page 50)

46 • Workstation Setup & Administration Guide

Chapter 4 • Assembling the System

To connect the Avid Equinox Break-Out-Box to the workstation

1. Make sure that the power switch on the break-out-box is in the

Off position.

2. Attach the power cord to the power connector at the back of the break-

out-box and plug it into a power outlet.

3. Locate the USB cable in the break-out-box kit.

4. Plug one end of the cable into the USB connector on the back of the

break-out-box.

5. Plug the other end of the cable into the USB connector on the back of

the workstation.

6. Plug one end of the digital tether cable into the In/Out connector at the

back of the break-out-box.

7. Plug the other end of the digital tether cable into the Digital tether

connector on the Avid Equinox PCI card.

8. Secure both ends of the cable with the thumbscrews on the cable connectors.

9. Attach one end of the BNC cable to the Sync output connector on the

break-out-box and the other end to the Reference signal in connector on

the Avid Equinox PCI card.

BNC cableDigital tether cable

USB cable

Avid Equinox Break-Out-Box Avid|DS workstation

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 167 168

No comments

Merging DUA II Specifications Page 50