Merging Horus User Manual download pdf (Page 5)

www.merging.com/horus Page 5 - 8

Horus Release Notes

Fixed in Firmware version 18725:

Warning: Users updating from a firmware < 18491 (RC1) will need to perform a second Shutdown of

the Horus after the Firmware update (in order to initialize correctly the AD and DA modules)

 Improvement: Metering support on the Web Access Page (see Horus user manual for details)

 Improvement: The Horus TFT Meter page will gray out all inactive MADI leds

 Improvement: WordClock output now supported at all sampling rates

 Improvement: Lock mechanism improved in case of high deviation

 Improvement: Discovery of connected Horus improved

 Improvement/Limitation: Support of "High speed mode" on MADI output was removed

 Fixed. AES and MADI input and lock accuracy at high sampling rates

 Fixed. WordClock input sync glitch

 Fixed. Horus potential audible clicks with a very large count of RAVENNA I/Os enabled

 Fixed. Prevent the Horus to stay stuck on 'Starting application' at start up

 Fixed: RAVENNA MADI i/o connections bug if toggling between Standard

(56)

& Extended

(64)

 Fixed: Presets can now be recalled without muting signal

Note: the Visible to RAVENNA module entries were removed to avoid confusion.

Fixed in Firmware version 18491:

 Improvement: Metering support (refer to Horus user manual for all details)

 Improvement: Web Access offline status detection in browser

 Fixed. AES module noise at 4FS/2FS

 Fixed. Screensaver setting not properly reloaded

 Fixed. LTC output improved accuracy

 Fixed. Auto IP addressing issue (3rd byte of IP address now below 128)

 Fixed. Channel routing issue on MADI (muted banks)

 Fixed. Timecode missing half-bit on the first frame

 Fixed. DA module Output Attenuation range now (-12dB to 0dB)

Fixed in Firmware version 18308:

* For Horus LTC support in RAVENNA. The Pyramix users must upgrade to Pyramix v8 BETA 6 in

order to have the LTC support.

 Improvement: LTC support

 Improvement: Video clock robustness

 Fixed. Noise on first channel of MADI output when in standard mode (56 channels)

 Fixed. 4FS small noise introduced on random channels

Fixed in Firmware version 17903:

* Pyramix RAVENNA users must upgrade to Pyramix v8 BETA 5 in order to be compatible with this

firmware 17903.

 Improvement: Video sync now supported for all formats

 Improvement: PreAmps Low Cut filter now supported

 Improvement: Support for RAVENNA ASIO (refer to ASIO driver for download)

 Improvement: Less clicks in AD gain adjustment

 Fixed. Preset: save to disk does not work, leads to a 404 browser page

 Fixed. Mixup in internal routing, some banks assignment did not work

 Fixed. Horus channel output duplication in routing (RAVENNA>MADI)

 Fixed. 2 samples delay on AD modules between first channel and subsequent channels

Fixed in Firmware version 17648:

Note: New firmware versioning to be able to track firmware and Pyramix versions

 Improvement: PreAmps grouping is now saved

 Improvement: PreAmps remote web access page support of 8 groups

 Improvement: PreAmps remote web access faders interaction improved

 Improvement: PreAmps remote web access added PAD button

 Improvement: PreAmps remote web access added channel Naming and Gain typing

 Fixed. Horus Ethernet connection, detection robustness

1 2 3 4 5 6 7 8

Horus Release Notes 1

Comments to this Manuals

No comments

Merging Horus User Manual Page 5

Comments to this Manuals

Related products and manuals for Unknown Merging Horus