Merging DUA II Setup Guide download pdf (Page 27)

System Inputs and Outputs

Workstation Setup Guide • 27

System Inputs and Outputs

The following table describes the system inputs and outputs:

The MIDI/game port on the lower-right corner of the workstation gives

you MIDI control of external controllers, such as the JLCooper MCS-3800.

MIDI control requires a separately purchased breakout cable and the proper

MIDI driver.

A recommended breakout cable is the Creative Labs MIDI adapter (part

number 1013251001), which provides MIDI in, MIDI out, and a joystick port.

For instructions on connecting peripherals and various video equipment to

your workstation, see Assembling the System on page 35.

Input/output Description

Video In HD via BNC connector

Video Out HD via BNC connector

Composite via BNC connector

S-video via S-video connectors

Optical Digital Input ADAT and S/PDIF multichannel optical digital interface (ODI)

Optical Digital Output ADAT and S/PDIF multichannel optical digital interface (ODI)

USB Provides a communications link between the workstation

and the Avid Equinox Break-Out-Box

Genlock Input BNC connector for sync input

RS-232 Remote DB-9 connector that connects the RS-232 to RS-422

convertor. Use the supplied cable only.

Adaptec 39160 VHDCI connectors for the Avid MediaDock LVD

storage system

MIDI out 15-pin game port that enables MIDI control for the

JLCooper MCS-3800 external controller

Avoid using adapters as they may cause signal degradation. If you

must use them, use only high-quality, tight-fitting adapters.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 57 58

No comments

Merging DUA II Setup Guide Page 27